Texas Trans Am Service & Restoration

Larry A's 1971 HO Trans Am Clone - Page 1

One quarter panel was replaced, and the body shell was sanded and primed.

The engine was built before the car was brought to Fort Worth.  It was dyno tested at over 600 horsepower.

A suitable set of hinges were located, cleaned and rebuilt with new bushings and pins.

The custom roll cage was installed with the front bar following the A pillar and the rear bar following the lines of the B pillar.

Lower splash panel brackets from another early 70s firebird were welded into front of the Trans Am fenders.

home restoration projects
parts articles links
frames site

"Restoring Old Dreams"

Owner and Operator, Mr. David Mars
Serving the community since 1991
Email: david@texastransams.com
: 817-563-2121

2000 - 2005 Texas Trans Am Service and Restoration
All rights reserved. Duplication only with prior approval.
design by JGH