Pre-fit the hood - Basic block sanding and drilling may be required - All
parts come in a Primer gray gel coated finish - lighter tension springs are required - Delivery time is approx. 5 weeks (Hood must be manufactured).
Our merchandise is guaranteed to be free from all defects in materials and
workmanship, for 30 days or we will replace or refund the purchase price (excluding freight charges) at our option, any product found to be
defective, subject to our inspection and approval.
All products are hand made. With this in mind, you must
we try to do our absolute best in finishing the product, where as most
qualified professionals can prep and paint. However, all edges are
finished with 40 grit and the surface is gel coated with a sandable type of
gel coat, which is excellent for superior paint adhesion. The products
require: alignment, sanding, priming, blocking & possibly some filling of
low spots, in addition on complex parts, mold seams must be removed. In
short, the parts do not come ready to install, prepped & painted the OEM
color of your vehicle with matching pin stripes.
Knowing that the parts are hand made, bumps, nicks, scratches, thin
gel coat, air pockets etc....though not common or intentional, may appear on
the product either immediately or as much as a year or more later. We will
not warranty our products against these types of problems. In realizing our
products are made of reinforced fiberglass, which is not as rigid or as
stable as steel, short or long term changes may occur on the finish of the
product. Although we use superior type resins, costing 50-60% more than
general purpose resins (which have significant post cure problems) the afore
mentioned problems may still occur and refinishing may be required at the
customers expense. All though fiberglass will not rust there is an
unwarranted possibility of cracking, chipping or delaminating.
All parts must be fitted immediately, within the 30 day return period.
There will be no returns or exchanges 30 from the shipping date of the
All products must be professionally installed by certified installers,
whom will assume all liability, responsibilities and risks involved with the use and
installation of these products. The proper fastening devices to hold the parts secure will solely be determined by the
Caution: FLAMMABLE & HAZARDOUS
Fiberglass may be deadly when burned. Proper safety equipment must be worn when
sanding or cutting fiberglass.
Panels may buckle, detach, disintegrate or delaminate and any speed.
Hinging and latching areas on parts such as hoods, doors, decks, etc...
are for show purposes only and are not guaranteed to hold any product firm to
the vehicle at any speed.
USE AT YOUR OWN RISK - NO SAFETY FEATURE IS INTENDED OR IMPLIED.